|
結構及用途 Structure
and purpose
該閥是通過電磁閥的導控實現準確的開啟或關閉，用于泵的出口處，防止介質倒流的逆止控制閥，當泵即將停止供水前，閥門先行緩閉
90％
左右，防止突然停泵而產生的水錘和水擊聲，當泵完全停止后，閥門再完全關閉，防止泵出現水的回流，有效地保護水泵，免受回流的沖擊而產生反轉，該閥有效防止水錘和水擊聲，密封可靠、動作平穩、使用壽命長。電磁閥可采用交流電220V或直流電24V。
Used at the pump outlet to carry out an accurate open or
close via the pilot control of the solenoid valve and。as a
check control valve，to prevent the medium from back-flow．When
the pump is about to stop water supply，it is slowly closed
by about 90％ first to prevent both water hammer and water
shock noise from being produced due to sudden stop of the
pump and．when the pump stops completely．it is fully closed
t0 prevent the water from back flow with the pump so as to
effectively protect it from counter movement due to the
shock of the back-flow This valve can effectively prevent
water hammer and wa-ter shock noise．be reliably sealed and
long time used and stably move The solenoid valve can use
either AC220V or DC24V power. |
