|
產品介紹
閥桿螺母
閥桿螺母的材料完全符合API標準，可耐高溫，抗腐蝕能力強。
螺栓連接
栓接閥桿的制造嚴格按照API600標準規范。螺母的制造嚴格按照ANSI B1.1標準規范。
栓接螺母,六角形, 剛性,熱鍛,制造嚴格按造標準ANSI B 18.2.2.
閥蓋
閥蓋和閥體壁厚相同與支架連接或分開.體蓋連接法蘭的孔口平面能與螺栓螺母完全吻合.
當閥門全開時可以更換填料,閥桿填料函尺寸嚴格按照API標準執行.
閥桿
單片結構的閥桿表面經過熱處理，硬度良好。頭部呈圓形且表面經過拋光處理，可降低其與閥板接套之間的摩擦。
閥板
閥板可隨閥桿自由轉動，當關閉閥門時可減小與閥座之間的摩擦。閥板鍛造并經過磨圓，鏡面拋光，熱處理和硬度調整。
閥體
鑄鋼閥體的壁厚高于API600的最低標準要求.通口和閥座尺寸按照ANSI B 16.5
的管件標準要求設計�？筛鼡Q閥座，體蓋連接為內外螺紋副，閥體中心為橢圓形可增加中腔壁厚, 承壓力能力亦隨之增強。
Design
JINGJIA cast steel globe valve are designed and manufactured
to provide maximum service life and dependability. All globe
valves are full ported and meet the design requirements of
American Petroleum Institute Standard API 600 & API 6D, BS
EN 13709 and generally conform to American Society complete
range of body/bonnet materials and trims.
Rang of Materials
Standard body/bonnet materials include nine grades of
carbon, low alloy and stainless steels, For special
apolications they can be supplied in other grades of alloy
and stainless steell, There′s′a full range of trim materials
to match any service. Optional packing and gasket materials
are available for a full range of service conditions.
Available
Modifications for JINGJIA Cast Steel Valves
* Trim Changes
* End Connection Modifications
* Packing and Gasket Changes
* Operator Mounting
* Handwheel Extensions
* Pressure Equalizing
* By-pass
* Customer Specified Coatings
* Weld End Bore Changes
* Oxygen & Chlorine Cleaning & Packaging |
